Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 20.06.2025 01:36

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

The MOV will conduct when the voltage exceeds 50% of line voltage.

The third is lightning and “how it gets conducted into a home.”

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

What are the most meaningful Jewish jokes that reveal insights about Jewish culture?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

What do you think of a parent telling their adult child to “keep their personal life to themselves” in relation to talking to them? No reason they should say that it was mean what should I do?

2024–10–10[John johnson John Johnson ]

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Why would a man be interested in an ordinary woman while there are very beautiful and fabulous women?

For this case there are devices called Metal oxide varistors (MOV).

It seems Mohan does not understand the difference between a comment and an Answer.

These are simplified answers to the original question, and does not change anything I wrote above.

Why do some women squirt and some don't?

This is where the MOV conducts again, and dissipated the energy.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

If you cloned 12 Michael Jordan's and 12 LeBron James' and had Team Jordan vs. James, which team would win the most games?

So, the voltage could go up to 500 volts, and the fuse will not open up.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

At least they know the answer if they wanted it.

Why are people so rude to debt collector’s? I am one and I am so tired of being mistreated. We are under paid and then have to deal with the most ungrateful, and disrespectful people. We aren’t customer service. Don’t get mad at us because YOU owe.

The other is “what does a “fuse” do?”

At one ohm, the resistor has a maximum of 1 watt power.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Ridley Scott's New Sydney Sweeney Thriller Tops the Streaming Charts After Just 1 Day - Comic Book Resources

Can the fuse protect the electronic devices from lightning instead of a surge protector.

An AC voltage/ current source, and an ac inductive load.

A circuit breaker is similar, but is resettable.

Where did Noah build the Ark? Was it in a desert or near water?

A fuse is a non-resetable over current circuit protector.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

but I think this circuit , shows a few more pieces.

Why did McLaren hope that the Ferrari pair would pit twice during the Italian Grand Prix?

One is “what exactly is in a ‘surge protector’ ? ”

eight

I post the exact comment here.

Al Pacino Meets Pope Leo XIV, Becoming First Movie Star to Get an Audience With American Pontiff - The Hollywood Reporter

nine

There are two important concepts here.

This one hit behind the barn.

MIT chemical engineers make potentially game-changing breakthrough with crude oil: 'Creates a new way to apply it' - The Cool Down

He then describes Rainy Season and Lightning.

Upvotes:

Barnstars:

How do flat Earthers explain the existence of other spherical planets?

This is where this question deviates from being a 'generic' question, and becomes more specific.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

He then asserts :

Now when you have a certain ac resistance, then a current flows in a loop.

What is lightning?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

What does a fuse do?

In schematic diagrams this is the symbol for a fuse:

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

These devices are installed between the “hot” and “neutral” and protective ground.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

(Dc diagram shown, AC is similar).

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Here is a simplified AC power diagram.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

a photo is worth a thousand words.

This is 'the assistant's answer'

It also is a device that limits the change in current flow.

the problem then depends on "how fast does the fuse operate?".

Because the load is inductive, the current lags the voltage.(by a bit).

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Edit 2024–10.

[image of Common-mode choke]

2024–10–14 [Omar Gharbi Omar Gharbi ]

so, what happens?

But… the neutral is now “floating” because of the 1 ohm resistance.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

He then describes the function of a fuse.

There are three different concepts here that are getting confused.

First Sentence:

But it can get overloaded, and no longer works.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

2024–10–16 [ OO OLAOYE OYEBODE ]

[old diagram got deleted by accident]

One

The bolt then partially travels down the line to your home.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

what exactly is a ‘surge’ protector?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This device then solves the entire problem.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

but this device (an Inductor) … impedes the rapid changes in the current.